8 - 5M - 10
Throttle Position Transducer
When it becomes necessary to replace the transducer remove wire connector, loosen lock nut and unscrew from mounting bracket. Unsnap core from carburettor linkage. Install new core and transducer, then adjust. Refer to Adjustment Procedures.
Vacuum Transducer
When it becomes necessary to replace the transducer, replace the Spark Control Computer.
CarbureUor Switch
When it becomes necessary to replace the carb switch, replace bracket and switch assembly.
Coolant Switch
Service is same as coolant temperature sending unit.
CarbureUor
Service procedures are the same as described under Group 14 of this manual.
ISSUED OCT. '78
..